IGLO-HS

A lift and slide door does something an ordinary slider cannot. Turn the handle and the whole panel lifts off its seals onto a carriage, so a door weighing several hundred pounds moves with one hand. Let go and it drops back down, compressing the gaskets along its full length.

2

EPDM gasket

Argon

STANDARD GLAZING FILL

7

NUMBER OF CHAMBERS

7.64 in

INSTALLATION DEPTH

1.4-2.05 in

Glass packages

A

Class profile

IGLO-HS uPVC Lift and Slide Patio Doors

Open, it glides. Closed, it seals like a fixed window. That is the difference worth understanding before you compare quotes, because it is why a lift and slide costs more than a standard patio slider and why it behaves differently ten years in.

Why an ordinary slider fails and this does not. A conventional sliding door carries its whole weight on rollers that stay engaged all the time. Every slide grinds the roller against the track with the panel’s full weight on it. The rollers wear, the panel starts to drag, and the brush seals that keep weather out are the same seals that have to let the panel pass, so they can never be tight.

A lift and slide separates those two jobs. Weight sits on the carriage only while the door is moving. The seals only have to seal, because nothing slides across them. That is why these doors stay smooth on large panels, and why they hold their weather performance rather than losing it a season at a time.

The practical consequence is size. Panels can run much larger than a stock American slider before the door becomes unpleasant to use. Installation depth on the standard build is 7.64 in, and glazing packages run 1.4 to 2.05 in.

For budgeting before you specify anything, what patio door replacement costs gives US market ranges by door type and size.

IGLO HS profile cross section
IGLO HS profile cross section

Finishes

Over 30 foil finishes, on the outside, the inside, or different on each face. That last option matters more than it sounds: a dark grey or black exterior with white inside is the most requested combination on modern US builds, and it costs no more than matching both sides.

The range covers whites and creams, the full grey family from light through concrete and quartz to basalt, metallic tones, and realistic woodgrains including light and natural oak.

Foil finishes are not paint. They are bonded to the profile and do not need repainting, which is the main reason uPVC outlasts a painted timber door on an exposed elevation with no maintenance at all.

Finish samples are on display at our Crown Point showroom. Grey and woodgrain foils in particular photograph badly, and picking one from a screen is how people end up disappointed.

Glass and glazing

Standard glazing is a double-chamber unit filled with argon. Warm-edge spacers sit at the perimeter of the glazing unit instead of the aluminum spacer used in cheaper units, which is where a surprising amount of heat is lost on a large door. On a patio door the glass is most of the opening, so the glazing package matters more here than on any window in the house.

Triple glazing is available and is worth considering on a north elevation, on anything exposed, or if you are building to a high energy standard. It adds weight, which a lift and slide carries comfortably and a standard slider often does not. If you are comparing glazing packages across the house, triple pane windows sets out the trade-offs.

Delivered and supported in the USA

Nationwide US delivery, a 20-year transferable product warranty, and a US support team.

Every door is built to your opening in millimeters rather than selected from a size list, so your measurement is the specification rather than a filter. On an opening this size that cuts both ways, and it is why we would rather measure it ourselves or check your figures before anything goes into production.

Send us your opening, get real numbers

Lift and slide is the choice when the opening is large and you want the glass to move sideways rather than swing. If you would rather the whole opening cleared completely, bifold patio doors fold back against the wall instead of stacking one panel behind another. If you want the mechanism in aluminum rather than uPVC for slimmer sightlines, see lift and slide doors. If you want this same door with a painted aluminum face outside, in any of over 200 RAL colors, see IGLO-HS Alucover aluminum-clad patio doors. If you do not need the lift mechanism, IGLO Edge Slide is our conventional uPVC slider, with triple glazing as standard and a lower price. The full range sits on the patio doors page.

Frequently asked questions

How big can a lift and slide door be?

Larger than a standard slider, and the limit is usually the glass weight and how it gets into the house rather than the mechanism. Tell us the opening and we will tell you the panel configuration that works, including whether it needs to be a two, three or four panel layout.

Is a lift and slide hard to operate?

The opposite, and it is the thing that surprises people in the showroom. Because the panel lifts clear of its seals before it moves, a very heavy door slides with one hand. Children and older users manage them comfortably. The handle does the work.

How does it compare to a bifold?

A lift and slide gives you bigger individual panes and a slimmer look when closed, but one panel always remains in the opening. A bifold clears almost the entire opening but has more frames in the view when shut. Bifold suits an opening you want to remove entirely in summer; lift and slide suits an opening you look through all year.

Does it need a threshold you trip over?

A low threshold option is available and is what most residential projects use. There is a genuine trade-off between a completely flush threshold and weather performance on an exposed elevation, and it is worth discussing against your specific site rather than assuming.